NLS Tools Circular Saw Blades
TCT Precision Range

A range of industrial quality, precision tungsten carbide tipped saw blades for accurate production cutting.

General Purpose - Alternate Top Bevel

For general purpose cutting on table-type saw benches. Stocked in a wide range of blade diameters and tooth pitches.

General Purpose - Heller Form

For cutting plastics and laminated boards. The heller tooth form breaks up the cut, giving a good surface finish and minimising breakout on the bottom surface of laminated boards.

Rip Saws - Multi-Rip

For ripping with the grain of soft- and hardwoods on multi-rip machines.

Rip Saws - With Wiper Slots

For ripping wet or dry woods. The wiper tips hold the wood apart and prevent the blade from binding in the cut.

Rip Saws - For Wadkin PUA

A blade particularly for the Wadkin PUA straight line edging machine.

Thin Kerf Saw Blades

For thin materials, such as single sheets of plastic, perspex etc. Minimum loss of material and chip-free cutting.

Crosscut Saw Blades with negative rake

For cross-cutting of soft- and hardwoods on pull-over, radial arm and pendulum machines.

Fine Tooth Saw Blades with negative rake

For cross-cutting and mitring of light aluminium and upvc thin-walled sections.

Splitting Saws for Moulding Machines

For multiple splitting on four-sided moulders. Thin kerf for minimum timber wastage.

Panel Sizing Saw Blades for Wall-Mounted Machines

For use on wall saws. Available with alternate top bevel for solid wood panels or with heller form for laminated chipboard and MDF panels.

Panel Sizing Saw Blades for Sliding Table Machines

For use on sliding table and dimension saw benches with or without pre-scoring units. Available with alternate top bevel for solid wood panels or with heller form for laminated chipboard and MDF panels.

Panel Sizing Saw Blades for Heavy Duty Machines

For continuous cutting of stacked panels. Made with extra-heavy body for strength and rigidity under load and large, high-grade tips for long life.

Scoring Saw Blades - Split Type

For pre-scoring the bottom face of double-laminated boards on machines equipped with a pre-scoring unit. Two blades with interlocking teeth. Cutting width adjustable by spacing rings.

Scoring Saw Blades - Conic Type

As for split type above, but one blade with conic tapered tips. The cutting width is adjusted by altering the height of the saw blade in the cut.

Non-Ferrous Saw Blades with negative rake

For cutting aluminium alloys and other non-ferrous metals. For use on mitring saws, cut-off machines and portable machines. Especially suitable for thin-shelled aluminium profiles.